As an Amazon Associate I earn from qualifying purchases.1. innomaker
Innomaker Rasp Pi HiFi DAC Hat PCM5122 Audio Sound Card Expansion Board for Raspberry Pi 4 3 B B+ Pi Zero W DAC Hat
innomaker - For more information, please refer to our wiki（view the link on color page comes with the goods. On-board a pair of gold plated rca left &right jacks and a 3. 5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals.
Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits. Support playing music from a hard disk or over the network. Class-leading stereo audio dac pcm5122, sample rates up to 384-khz/32-Bit.
The hifi dac hat compatible with raspberry pi 4, 3b, zero w, 3b+ with the 40-pin connector. Absolutely perfect to support all raspberry pi music playback system, runeaudio, PiMusicBox, OpenELEC, Max2Play, like OSMC, PiCorePlayer, volumio, Moode, Debian, Ubuntu etc.
Paired with stereo high fidelity headphone amplifier TPA6133. Comes with software, document and friendly technology support. Connects directly to the Raspberry Pi board, Zero, no additional cables required, no soldering. Support dsd over PCMDOP mode. Provides 2. 1vrms ground-centered outputs coupled with Film capacitor.
2. Tonysa
HiFi Digi DAC and HiFi Digi Audio Sound Card for Raspberry PI 3 Model B / 2B / B, Tonysa Digital Audio Card for Raspberry PI
Tonysa - And it is perfectly compatible with the official PI HAT size of the raspberry pie. Based on the high gold plating process of the PCB board, the expansion board can be directly plugged and unplugged, the arc ensures the continuity of the signal impedance and reduces the reflection and refraction of the signal.
Used for 120db squelch signal-to-noise ratio snr, i2s interface, up-slope or down-slope, and adjust volume parameter adjustment through I2C interface; support 16 to 32-bit audio data format; distortion and dynamic ideal, adopt high-end PCM5122 chip, 112dB Dynamic range, and analog squelch without sonic boom operation.
With load support as low as 1K, the PCM510xA can drive multiple parallel products. Power supply $ when using the digital audio sound card module, the Raspberry Pi power supply and the DAC part are independently powered and isolated, the power supply is isolated. That is, and the current sound is eliminated through the serial port without interference.
Output port with gold-plated RCV dual terminal and gold-plated 3. 5mm headphone holder. Indicator light $ the product has an interface for providing an infrared receiver, adding a two-color LED to provide status display, green for the DAC lamp decoded, stopped or not working, red for the DAC power indicator power is on, working for the DAC Have a better understanding. Output method $ this product integrates a negative charge pump with no dc blocking output; 2. 1vrms ground center output; can suppress very good noise.
| Brand | Tonysa |
| Manufacturer | Tonysa |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Width | 0 cm (0 Inches) |
| Part Number | Tonysatscv0egf17 |
3. Eboxer
Eboxer Raspberry Pi Expansion Board Raspberry Pi HIFI DAC+ HD Audio PCM5122 24-bit Expansion Board for Raspberry Pi 3 Model B / 2B /B+/A+/ Raspberry Pi Zero W
Eboxer - Powered by raspberry pi, no external power requirements, Conforms to the Raspberry Pi hardware-attached-on-top HAT specification. After using x920 board, runeaudio, user can coordinate with the broadcast system such as Volumio, OSMC, XMBCKodi, MOODE etc.
With dac all-function pcm5122 chip and i2s input, x920 dac+ board is a perfect hifi / hiFI / Full-HD audio expansion board for Raspberry Pi 3 Model B/ 2B / DAC+ / B+;.
To set up your own HIFI player network. X920 is available with rca, 3. 5mm phone jack output connectors and built in IR receiver Vishay TSOP34838;. Full-hd audio – up to 24-bit/192khz playback and class leading audio 112db SNR, and -93db THD function, Integrated hardware volume control with TI's LP5907 Ultralow-Noise voltage regulator for optimal audio performance.
| Brand | Eboxer |
| Manufacturer | Eboxer |
| Height | 3 cm (1.18 Inches) |
| Length | 6.6 cm (2.6 Inches) |
| Width | 5.7 cm (2.24 Inches) |
| Part Number | Eboxerxmfe8h9wz1 |
4. Cuifati
Cuifati Expansion Board for Raspberry Pi,3 Model B / 2B /B+/A+/, fosa PiFi/DAC+/HiFi/Full-HD Audio Expansion Board for Raspberry Pi Zero W, Support Volumio RuneAudio OSMC XMBCKodi MOODE
Cuifati - To set up your own HIFI player network. With dac all-function pcm5122 chip and i2s input, x920 dac+ board is a perfect pifi / Full-HD audio expansion board for Raspberry Pi 3 Model B/ 2B / hiFI / DAC+ / B+;.
Full-hd audio – up to 24-bit/192khz playback and class leading audio 112db SNR, and -93db THD function, Integrated hardware volume control with TI's LP5907 Ultralow-Noise voltage regulator for optimal audio performance.
Powered by raspberry pi, no external power requirements, Conforms to the Raspberry Pi hardware-attached-on-top HAT specification. X920 is available with rca, 3. 5mm phone jack output connectors and built in IR receiver Vishay TSOP34838;. After using x920 board, runeaudio, osmC, xmbckodi, user can coordinate with the broadcast system such as Volumio, MOODE etc.
| Brand | Cuifati |
| Manufacturer | Cuifati |
| Height | 3 cm (1.18 Inches) |
| Length | 6.6 cm (2.6 Inches) |
| Weight | 0.03 kg (0.07 Pounds) |
| Width | 5.7 cm (2.24 Inches) |
| Part Number | Cuifatipgt3x8ewyn |
5. Kuinayouyi
Kuinayouyi PCM5122 for Raspberry Pi HiFi DAC HAT HiFi DAC Audio Card Expansion Board for Raspberry Pi 4 3 B+ Pi Zero W
Kuinayouyi - Support dsd over PCMDOP mode. Connects directly to the Raspberry Pi board, Zero, no additional cables required, no soldering. On-board a pair of gold plated rca left &right jacks and a 3.
5mm high-end headphone jack output, allow you free to your music through Raspberry Pi to another terminals. Provides 2. 1vrms ground-centered outputs coupled with Film capacitor.
Support playing music from a hard disk or over the network. Adopt 384khz/32bit dac pCM5122. Support all raspberry pi music playback system, RuneAudio, moode, picoreplayer, like OSMC, OpenELEC, max2play, PiMusicBox, volumio, Debian, Ubuntu etc.
Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits. Class-leading stereo audio dac pcm5122, sample rates up to 384-khz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. The hifi dac hat compatible with raspberry pi 4, 3b, zero w, 3b+ with the 40-pin .
6. Hopcd
Raspberry Pi 3 Model B,Raspberry Pi 2 Model B+, Hopcd For Raspberry Pi Audio Amplifier Module X400 V3.0 Audio Expansion Board HiFi DAC Stereo Audio Card Expansion Board for Raspberry Pi Model 3 B+
Hopcd - High power amplifieraudio amplifier maximum power up to 2 x 30w 24vdc power supply, horn impedance 8 ohm. Adopts high-sensitivity infrared receiver 38KHZ. High-efficiency pressure-relief/DC switch converter supply stable power to the motherboard, 6-26VDC input, 5.
1v maximum 3A output. Customer satisfactionplease contact our customer service department if you are not satisfied with the product or have any questions or comments. High quality chipadopts ti original high-quality audio stereo dac chip ti pcm5122, adopts ti texas instrument Digital Amplifier chip TPA3116D2.
Fitmentx400 v3. 0 is a cost-effective sound card for raspberry pi model 3 b+, pimusicbox, Raspberry PI 3 model B and Raspberry Pi 2 model b+.
It makes it easier for players to raspberry pie to create non-destructive music systems or network radio radios. Dynamic range signal-to-noise ratio SNR up to 112db, maximum distortion is less than 00019%. Adopts ti original high-quality headphone amplifier chip Ti TPA6133A. We will surely find a solution that will satisfy you. Recommended use of operating systems such as Volumio, Runeaudio, etc.
| Brand | Hopcd |
| Manufacturer | Hopcd |
| Height | 4 cm (1.57 Inches) |
| Length | 8.8 cm (3.46 Inches) |
| Weight | 0.13 kg (0.29 Pounds) |
| Width | 8.7 cm (3.43 Inches) |
| Part Number | Hopcdumrnz9cq62 |
7. Kafuty
Kafuty HIFI Audio Board for Raspberry PI, HIFI DAC Amplifier Gold-plated RCV Double Clamp, 3.5 mm jack socket Digital Audio Card for Raspberry PI Model 3 B+ / 2B / 3B, Blue
Kafuty - Provide infrared receiver interface. Isolation power supply designisolate the raspberry pi power supply and the dac part independently, perfectly compatible with the official PI HAT size of the Raspberry Pi, based on the high gold plating process of the PCB board, and no interference through the serial port, eliminating the current sound, arc high-end HIFI DAC The arc is used to better ensure the impedance continuity of the signal and reduce the reflection and refraction of the signal.
Upgrade dac chipadopt high-end pcm5122 chip, dynamic range of 112db, adopt i2s interface, distortion degree -93db. Pcm5122also integrates a negative charge pump, output without DC blocking capacitor; 2.
1vrms ground center output; can suppress very good noise. Led displayadd two-color led to provide status display, green light is DAC light working status decoding is on, stopped or not working, red is DAC power indicator power is normally on, and have a better understanding of DAC work.
Used for 120db squelch signal-to-noise ratio snr without sonic boom operation, and adjust volume parameters through I2C interface; support 16 to 32-bit audio data format; ideal distortion and dynamics, support high sampling rate of 384kHz, ramp up or down ramp and simulated squelch. With load support as low as 1K, PCM510xA can drive multiple parallel products. Easy to useno soldering, no usb dac interface, directly plug and unplug the expansion board, and use the I2S interface to directly decode the digital-to-analog conversion, with gold-plated RCV dual terminals and gold-plated 3.5mm headphone socket output port.
| Brand | Kafuty |
| Manufacturer | Kafuty |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Width | 0 cm (0 Inches) |
| Part Number | Kafutye6mny1ax58 |
8. Bewinner
Bewinner Expansion Board for Raspberry Pi 3 Model B / 2B /B+/A+/ Raspberry Pi Zero W, PiFi/DAC+ / HIFI/Full-HD Audio Expansion Board 24-bit
Bewinner - Powered by raspberry pi, no external power requirements, Conforms to the Raspberry Pi hardware-attached-on-top HAT specification. Expansion board with dac all-function pcm5122 chip and i2s input, x920 dac+ board is a perfect PiFi / DAC+ / Full-HD audio expansion board for Raspberry Pi 3 Model B/ 2B / HIFI / B+.
To set up your own HIFI player network. Full-hd audio – up to 24-bit/192khz playback and class leading audio 112db SNR, and -93db THD function, Integrated hardware volume control with TI's LP5907 Ultralow-Noise voltage regulator for optimal audio performance.
After using x920 board, runeaudio, osmc, user can coordinate with the broadcast system such as Volumio, xmbckodi, MOODE etc. X920 is available with rca, 3. 5mm phone jack output connectors and built in IR receiver Vishay TSOP34838;.
| Brand | Bewinner |
| Manufacturer | Bewinner |
| Height | 3 cm (1.18 Inches) |
| Length | 6.6 cm (2.6 Inches) |
| Weight | 0.03 kg (0.07 Pounds) |
| Width | 5.7 cm (2.24 Inches) |
| Part Number | Bewinnervyrpksgim7 |
9. Sutinna
Sutinna Digital Audio Sound Card Module, I2S Interface HiFi DIGI DAC + HIFI DIGI Digital Audio Card for Raspberry PI 3 Model B / 2B / B
Sutinna - Perfect compatibility raspberry pie official pi hat size, better guarantee the impedance of the signal continuity, arc wire high-end HIFI DAC adopts arc wire, gold plating process of tall based on circuit board, reduce the signal reflection and refract.
Upgrade dac chip, and can via the i2c interface adjust audio volume parameter adjustment; supports 16 32 bit audio data format; Distortion and dynamic is very ideal, using i2s interface, using pcm5122 chip of high end, support the tall sampling rate of 3.
The insulated power supply design, make the raspberry pie nutrition and DAC part of the independent power supply isolation, and by the bead completely without mutual interference, get rid of the current sound.
Pcm5122 also integrated negative charge pump, the output without dc blocking capacitor; 2. 1 vrms ground center output; ability to suppress very good band noise. Due to the load support low to 1K, PCM510xA can drive a multitude of parallel products. Output ports with gold plated HS dual terminal and gold-plated 3. 5mm Headset seat.
| Brand | Sutinna |
| Manufacturer | Sutinna |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Width | 0 cm (0 Inches) |
| Part Number | Sutinnairczsqtmh4 |
10. UGREEN
Raspberry Pi, External USB Audio Adapter DAC Converter with 3.5mm Aux and 2RCA Stereo Audio Output, Linux, Mac, PS4, 3.5mm Microphone Sound Input for Windows, UGREEN USB Sound Card, 1M Cable
UGREEN - Universal compatibility: this usb external stereo sound adapter adopted advanced c-media ic technology for optimal sound quality and device performance. Made of abs material that is good for heat dissipation, the external audio card is more durable.
Versatile external usb sound card: the main functions of this usb sound adapter include: 1bypass or replace a damaged internal sound card of PCs and allow audio to come out from a USB port while the PC's sound card or audio jack is faulty.
2enable ps4 or computers without 3. 5mm audio port to use with headsets/microphones of 3. 5mm plugs. 3solve the shortage of 3. 5mm jack issue of chromebook/surface and allow to use aux headphone and microphone simultaneously.
Usb bus-powered, no external power is required. Easy to set up: the usb to headphone microphone adapter has no need for driver installation and just plugs & plays. Warm reminder:1it is not recommended to use the 3. 5mm port and 2rca port of this sound card simultaneously, not surround sound. 3 it does nOT support PS3. 4 the 3. 5mm microphone-in port is mono and only compatible with TRS microphone, because the audio volume of one device may decrease.
innomaker - For more information, please refer to our wiki（view the link on color page comes with the goods. On-board a pair of gold plated rca left &right jacks and a 3. 5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals.
Tonysa - And it is perfectly compatible with the official PI HAT size of the raspberry pie. Based on the high gold plating process of the PCB board, the expansion board can be directly plugged and unplugged, the arc ensures the continuity of the signal impedance and reduces the reflection and refraction of the signal.
Eboxer - Powered by raspberry pi, no external power requirements, Conforms to the Raspberry Pi hardware-attached-on-top HAT specification. After using x920 board, runeaudio, user can coordinate with the broadcast system such as Volumio, OSMC, XMBCKodi, MOODE etc.
Kuinayouyi - Support dsd over PCMDOP mode. Connects directly to the Raspberry Pi board, Zero, no additional cables required, no soldering. On-board a pair of gold plated rca left &right jacks and a 3.
Hopcd - High power amplifieraudio amplifier maximum power up to 2 x 30w 24vdc power supply, horn impedance 8 ohm. Adopts high-sensitivity infrared receiver 38KHZ. High-efficiency pressure-relief/DC switch converter supply stable power to the motherboard, 6-26VDC input, 5.
Bewinner - Powered by raspberry pi, no external power requirements, Conforms to the Raspberry Pi hardware-attached-on-top HAT specification. Expansion board with dac all-function pcm5122 chip and i2s input, x920 dac+ board is a perfect PiFi / DAC+ / Full-HD audio expansion board for Raspberry Pi 3 Model B/ 2B / HIFI / B+.
Sutinna - Perfect compatibility raspberry pie official pi hat size, better guarantee the impedance of the signal continuity, arc wire high-end HIFI DAC adopts arc wire, gold plating process of tall based on circuit board, reduce the signal reflection and refract.
UGREEN - Universal compatibility: this usb external stereo sound adapter adopted advanced c-media ic technology for optimal sound quality and device performance. Made of abs material that is good for heat dissipation, the external audio card is more durable.
